This is a wheel plate that is 1"x6". The edges are more horizontal with the ground and do not curve up. The entire project is glazed with a dark forest green. A skill I used when making this project was creating an even layer of clay throughout the whole plate. An element seen in this project is simplicity with color.
 
this is a wheel plate that is 1''x6''. The walls are flared out slightly and the base is flat. it is glazed with the white glaze and on top sponged on all around is cobalt blue. An art element I used when making this project was repetition shown through the repeated pattern of sponge marks of the glaze. A skill I used when making tis project was using the blue ribbed tool to evenly distribute the clay to create a plate.
 
This is an extra credit wheel bowl that is 6''x8''. the walls are very thin all the way down and the base is much more narrow than the top width of the bowl. the project is glazed entirely in forest green. An art element I used when making this project was value shown by the very light tint of the glaze on this project. A skill I used when making this project was being able to pull the walls very thin but still keep the shape of the project.
 
this is an extra credit wheel bowl that is 4''x6''. IT is shorter than it is wide and the walls are evenly pulled up. this bowl is glazed half with yellow glaze and half with cobalt blue. An art element I used when making tis project was line by using two different glazes and creating a distinctive diagonal line cutting the project in half. A skill I used when making this project was evenly pulling walls and creating more of a bowl shape.
 
This is a wheel altered bowl that is 5"x3". It has very thin walls and the edges are altered by being pushed and pulled to create a wave like effect. The entire thing is glazed in black glaze. An art element present in this project is movement. A skill I used when making this project was altering the bowl while still on the wheel.
 
This is a wheel mug that is 5''x4''. It is more of a cylinder shape with a skinnier handle attached. The glaze is forest green with black stain added in a swirl pattern on the interior and handle as well as "#1" written on the side. An art element that is present in this project is pattern. A skill I used when making this project was personalization.

 

This is a wheel vase that is 10''x3''. It has a defined lip at the top and gradually narrows as you go farther down towards the base. It is glazed with Forrest green on the top and bottom with a stripe of clear glaze on the exterior in the middle and entirely on the inside. An art element present in this project is movement shown by the drips from the top. A skill I used when making this project was the process of choking.

 

These are a set of three wheel candle holders. They are 4''x2''. They are short and wide with a narrower top than base. In each candle holders walls there are three hearts and scattered circles carved out. They are glazed entirely with black. An art element shown in these projects are negative and positive space. A skill I used when making these projects was choking to make to top narrow.